mNeonGreen-Trap Agarose

Description
mNeonGreen-Trap Agarose is an affinity reagent for immunoprecipitation of mNeonGreen-fusion proteins.
It consists of a mNeonGreen Nanobody/ VHH coupled to agarose beads.

Specificity
mNeonGreen, Branchiostoma lanceolatum

Applications
Immunoprecipitation/ Co-IP
Mass spectrometry
On-bead enzyme assays
ChIP/ RIP analysis

 

 

Product Size Code Price Buy
Product mNeonGreen-Trap Agarose Size 250 µL (10 reactions) Code nta-10 Price $ 275
Buy +
Product mNeonGreen-Trap Agarose Size 500 µL (20 reactions) Code nta-20 Price $ 475
Buy +
Product mNeonGreen-Trap Agarose Size 2.5 mL (100 reactions) Code nta-100 Price $ 2050
Buy +
Product mNeonGreen-Trap Agarose Size 5 mL (200 reactions) Code nta-200 Price Please inquire
Product mNeonGreen-Trap Agarose Size 10 mL (400 reactions) Code nta-400 Price Please inquire
Product mNeonGreen-Trap Agarose Kit Size 500 µL (20 reactions) Code ntak-20 Price $ 595
Buy +
Product Binding Control Agarose Beads Size 500 µL (20 reactions) Code bab-20 Price $ 75
Buy +
Product Spin Columns Size 10 units Code sct-10 Price $ 35
Buy +
Product Spin Columns Size 20 units Code sct-20 Price $ 60
Buy +
Product Spin Columns Size 50 units Code sct-50 Price $ 130
Buy +
Product mNeonGreen-Binding-Protein Size 250 µL Code nt-250 Price $ 275
Buy +

Affinity
Dissociation constant KD of 2 nM

Wash buffer compatibility
4 M urea, 2 M NaCl, 10 mM DTT, 2 % Nonidet P40 Substitute, 1 % Triton X-100, 0.2 % SDS

Specificity
mNeonGreen, Branchiostoma lanceolatum

Binding capacity
10 µL slurry bind approximately 12 µg of recombinant mNeonGreen

Coupled Nanobody/ VHH
Recombinant, monoclonal anti-mNeonGreen single domain antibody (sdAb) fragment

Bead properties
Bead size: ~ 90 µm (cross-linked 4 % agarose beads)
Storage buffer: 20 % EtOH

Elution
- SDS sample buffer
- 0.2 M glycine pH 2.5
Instead of elution, we recommend on-bead assays like on-bead digestion for MS analysis.

Compatibility with mass spectrometry
The mNeonGreen-Trap is optimized for on-bead digestion. Complete tryptic digest results in 5-6 peptides.

Storage instructions
Shipped at ambient temperature. Upon receipt store at 4°C. Stable for one year.

Should I use an N-terminal or C-terminal fusion tag?

Both the N-terminal or C-terminal fusion tag work well with the traps.

How can I avoid unspecific protein interactions binding to the trap?

For preclearing of your sample we recommend to use our binding controls (bab-20 or bmab-20).

Please find more information in our Troubleshooting guide

How can I elute bound proteins from a trap in their native state?

You can elute your fusion protein of interest with 0.2 M glycine pH 2.5 at room temperature. Pipette the beads up and down for 60-120 seconds and repeat this step. Ensure to neutralize your supernatant immediately afterwards by adding 1 M Tris base pH 10.4.

How many mammalian cells are required for an immunoprecipitation reaction?

For one immunoprecipitation reaction, we recommend using ~10^6 - 10^7 mammalian cells. The yield is also dependent on the expression level of your protein of interest and the interaction partners.

How much cell extract should I use for an immunoprecipitation reaction?

For other type of cells than mammalian cells, we recommend using 0.5 - 1.0 mg of cell extract.

Do I need to elute bound proteins from the beads for mass spectrometry analysis?

No, you can directly conduct an on-bead digestion after immunoprecipitation. This procedure allows faster and more efficient sample preparation and a potential higher yield.
Please find more information here:

Preomics kit

Protocol on-bead digestion

Do I need to elute my protein of interest from the beads for enzymatic assays?

No, you can directly perform your enzymatic assay on the beads if the active center is not blocked.

Please find more information in our application note "enzymatic activity assay"

What is the amount of trap slurry I need for one immunoprecipitation reaction?

25 µL slurry are sufficient for one pull-down reaction as the affinity of the traps is very high.

Benefits

  • Superior pulldown of mNeonGreen-fusion proteins
  • No heavy & light chains in your downstream application
  • Strong binding even under harsh washing conditions
  • Short incubation time of about 60 minutes

mNeonGreen-Trap Agarose Kit

The mNeonGreen-Trap Agarose is also available in a kit, including:

  • mNeonGreen-Trap Agarose
  • Lysis*, wash and elution buffers

*The lysis buffer provided is suitable for mammalian cells. For other cell types use another suitable lysis buffer.

Spin columns

Binding Control for Agarose Beads

Download Whitepaper
Order Free Test-Sample
Email newsletter

Only for research applications, not for diagnostic or therapeutic use!